应用领域与百科/ Brief Introduction：

本研发线由全手动理瓶机、滾筒式洗瓶机、杀菌干澡机、眼蓝药液罐装旋盖机、柜式标贴纸制冷机组成，可成功理瓶、水、气的洁净、烘烤及老化空气消毒、罐装、加塞、旋盖、标贴纸等工艺，注意用到眼蓝药液极其他小的用药量稀硫酸的联线研发，也可单机手游自由选择。是符合让GMP让。This production line consist of  Automatic Bottle Unscrambler,  Bottle Washing Machine, Tunnel Type Sterilization Drier, eyedrop filling machine, Vertical Labeling machine, can complete bottle sorting, water,and gas cleaning, drying and ozone disinfection, filling, plugging, capping, labeling, mainly used in eyedrops and other small doses of solution, also can be used single independently.　 Meet the GMP requirement.

优势/Characteristic：

超声波焊接机组设计的结构的合适，运作安稳、灌装生产线计算精度更高，具国内外同行的产品业好关卡。是复合GMP条件。     眼麻醉药装罐旋盖机以是我厂家的其三四代的产品，人机对战画面管控，运动泵装罐，由真空环境吸机器手充当汽缸很好的打塞，确认了相对稳确定和合格达标率。选择恒扭距旋盖，具无瓶不装罐、无塞不上盖，无瓶无塞可重新停止设备运转的功效。    It with reasonable structure, higher precision in filling, reaching the advanced level in domestic same business. Meet with requirement of GMP standard completely.eyedrop filling capping machine is a third generation product, human-machine interface operation, filling by peristaltic pump, replace air cylinder with vacuum drived manipulator for plugging, aquire higherstability and percent of pass. Constant torquecap screwing. No bottle no filling, no plug no capping and automatically stop if cap and plug is under-supply.   

技術产品参数/technical parameters：

实用尺寸/Bottle size	10-20ml
研发性能/Capacity	40-60瓶/分  70-120瓶/分 40-60/  70-120 bottles/min
用清水压为/ Hydraulic Pressure Mpa	0.3Mpa
使用蓄水量 /water consumption	0.5 m3/h
洁净室再压缩气流压力值 /Clean compressed air pressure	0.6-0.8Mpa
是否干净缩短暖空气用水量/Clean compressed air consumption	300 L/min
电/Voltage	380V/50Hz
工率/Power	5.5 kw
生产加工线总长/Dimension	11000*1500*1900mm